Removal and Installation
WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear seat backrest. For additional information, refer to SEAT BACKREST - REAR in this article.
- Remove the backrest folding armrest.
- Detach the 60 percent backrest J-strip and separate the backrest trim cover hook and loop fasteners.
- Remove and discard the hog rings and remove the 60 percent backrest trim cover.
- Detach the 40 percent backrest J-strip and separate the backrest trim cover hook and loop fasteners.
- Remove and discard the hog rings and remove the 40 percent backrest trim cover.
- To install, reverse the removal procedure.
All backrests
60 percent backrest
CAUTION:
Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the seat backrest foam pad.
40 percent backrest
CAUTION:
Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the seat backrest foam pad.
All backrests