Stoplamp Switch: Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Initial installation of the BPP switch allows for one adjustment. If additional adjustments are required, install a new BPP switch.

To unlock, rotate the knob counterclockwise to the stop.

Fig 1: Rotating Knob Counterclockwise To Stop
Courtesy of FORD MOTOR CO.
With the engine running, fully depress the brake pedal.
Install the BPP switch and slowly release the brake pedal.