LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (AUTOLAMP Systems - BLACKWOOD & F150 Pickup) >> System Tests >> Test E: One High Beam Headlight Inoperative

Test E: One High Beam Headlight Inoperative

WARNING: This page is about a different car, the 2002 Lincoln Blackwood and 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch to LOCK position. Disconnect inoperative headlight harness connector. Turn headlights on. Place multifunction switch in high beam position. Measure voltage between ground and inoperative headlight harness connector terminal (Light Green/Black wire). If battery voltage exists, replace headlight bulb. See HEADLIGHT BULB  under REMOVAL & INSTALLATION. If battery voltage does not exist, repair open in Light Green/Black wire.

scientia non olet · About LEMON Manuals