LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1262 (Engine - 3.0L (4V)) >> In-Vehicle Repair >> Oil Cooler >> Removal

Oil Cooler: Removal

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Drain the cooling system. For additional information, refer to ENGINE COOLING .
  3. Remove the LH exhaust manifold. For additional information, refer to EXHAUST MANIFOLD - LH  in this article .
  4. Disconnect the 2 coolant hoses.
    5. CAUTION: If metal or aluminum foreign material is present in the oil cooler, mechanical concerns exist. To diagnose mechanical concerns, refer to ENGINE SYSTEM-GENERAL INFORMATION .
  5. Remove the bolt and the oil cooler.
    • Inspect the oil cooler.
scientia non olet · About LEMON Manuals