LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1258 (Power Steering) >> Removal And Installation >> Power Steering Control Valve Actuator >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the variable assist power steering (VAPS) actuator electrical connector.
  2. Remove the 2 bolts and the VAPS actuator.
    • To install, tighten to 3 Nm (27 lb-in).
  3. To install, reverse the removal procedure.