LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1256 (Anti-Lock Control) >> Diagnosis And Testing >> Anti-Lock Control >> Pinpoint Tests >> Pinpoint Test M: DTC C1960 - Driver Brake Apply Circuit Fault >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

The 12-volt driver brake apply (DBA) signal is sent from the anti-lock brake system (ABS) module during brake application to the trailer tow relay (if equipped).

Voltage is supplied by circuit 29S-CF2 (OG/BU).

scientia non olet · About LEMON Manuals