LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1252 (Rear Disc Brakes) >> Removal And Installation >> Rear Disc Brake >> Installation

Rear Disc Brake: Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean any rust or debris from the brake disc and the wheel hub.
    • Use brake parts cleaner to clean the brake disc and hub surfaces.
    2. CAUTION: Do not allow the lubricant to make contact with the wheel studs, brake pads, or brake disc.
  2. Apply a thin coat of anti-seize lubricant to the hub flange.
  3. Position the brake caliper and brake caliper anchor plate assembly and install the 2 bolts.
    • Tighten to 103 Nm (76 lb-ft).
  4. Test the brakes for normal operation.
scientia non olet · About LEMON Manuals