LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1251 (Front Disc Brakes) >> Removal And Installation >> Front Disc Brake Shield >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake disc. For additional information, refer to BRAKE DISC  in this article .
    2. CAUTION: 2. Do not use a drill larger than 6.0 mm (0.23 in) to remove the rivet from the brake disc shield.
  2. Using a 5.5 mm (0.21 in) drill, remove the 3 rivets.
  3. Remove the brake disc shield.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals