LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1251 (Front Disc Brakes) >> Removal And Installation >> Front Brake Caliper Anchor Plate >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake pads. For additional information, refer to BRAKE PADS  in this article .
  2. Remove and discard the 2 brake caliper anchor plate bolts.
    • To install, tighten to 103 Nm (76 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals