LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1242 (Noise, Vibration & Harshness) >> Diagnosis And Testing >> Noise, Vibration and Harshness (NVH) >> Component Tests >> Pilot Runout

Pilot Runout

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the special tools on the pilot, as close to the hub as possible. Zero the indicator to allow the pointer to deflect either way.
    Fig 1: Measuring Pilot Runout
    G03897228Courtesy of FORD MOTOR CO.
  2. Rotate the hub 1 full turn and note the maximum and minimum readings. The difference between the maximum and minimum readings will be the total pilot runout. Pilot runout must not exceed 0.15 mm (0.006 in).
scientia non olet · About LEMON Manuals