LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1235 (Front Suspension) >> Removal And Installation >> Stabilizer Bar Bushing - E150-E450 >> Removal

Stabilizer Bar Bushing - E150-E450: Removal

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the stabilizer bar. For additional information, refer to STABILIZER BAR - E150-E450 .
  2. Using the special tools, remove the stabilizer bar bushing from the I-beam axle.
    Fig 1: Removing Stabilizer Bar Bushing From I-Beam Axle
    G04025783Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals