Component Testing Procedure
WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
EXTERIOR REAR VIEW MIRROR SWITCH (17B676) - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Left mirror | Selector switch Left | ||
| Up | 1 and 6 | Up | Closed circuit |
| 5 and 3 | |||
| Down | 1 and 5 | Down | Closed circuit |
| 6 and 3 | |||
| Left | 1 and 6 | Left | Closed circuit |
| 8 and 3 | |||
| Right | 1 and 8 | Right | Closed circuit |
| 6 and 3 | |||
| Right mirror | Selector switch Right | ||
| Up | 1 and 6 | Up | Closed circuit |
| 2 and 3 | |||
| Down | 1 and 2 | Down | Closed circuit |
| 6 and 3 | |||
| Left | 1 and 6 | Left | Closed circuit |
| 7 and 3 | |||
| Right | 1 and 7 | Right | Closed circuit |
| 6 and 3 |