Generator Load
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2003 Mercury Sable, 2003 Mercury Mountaineer, 2003 Mercury Marauder, 2003 Mercury Grand Marquis, and 2003 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
Generator Load Input (GLI) circuit is used by PCM to determine generator load on engine. As generator load increases, PCM will adjust idle speed accordingly. This helps reduce idle surges due to switching high current loads. GLI signal is sent to PCM from voltage regulator/generator. GLI signal is a variable frequency duty cycle. Normal operating frequency is 40-250 Hz. Normal signal DC voltage (referenced to ground) is between 1.5 volts (low generator load) and 10.5 volts (high generator load).