LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Engine Controls - Theory & Operation - CNG, Flex-Fuel & Gasoline) >> Computerized Engine Controls >> Input Devices >> Engine Coolant Temperature Sensor

Engine Coolant Temperature Sensor

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2003 Mercury Sable, 2003 Mercury Mountaineer, 2003 Mercury Marauder, 2003 Mercury Grand Marquis, and 2003 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Engine Coolant Temperature (ECT) sensor is a thermistor device in which resistance changes with temperature. Electrical resistance of a thermistor decreases as temperature increases, and increases as temperature decreases. Varying resistance affects voltage drop across sensor terminals and provides electrical signals to PCM corresponding to temperature. Thermistor type sensors are considered passive sensors. A passive sensor is connected to a voltage divider network so that varying resistance of passive sensor causes a variation in total current flow. Voltage that is dropped across a fixed resistor in a series with sensor resistor determines voltage signal at PCM. This voltage signal is equal to reference voltage minus voltage drop across fixed resistor. ECT measures temperature of engine coolant and is threaded into an engine coolant passage. ECT sensor is similar in construction to IAT sensor.