Camshaft Position Sensor
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2003 Mercury Sable, 2003 Mercury Mountaineer, 2003 Mercury Marauder, 2003 Mercury Grand Marquis, and 2003 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
A 3-pin Hall Effect type Camshaft Position (CMP) sensor or a 2-pin variable reluctance sensor is used. See Fig 1 and Fig 2 . CMP sensor is used to determine camshaft position and to identify when piston No. 1 is on its compression stroke. CMP sensor signal is used by PCM for synchronizing the firing of sequential fuel injectors. Applications with Coil On Plug (COP) ignition also use CMP signal to select the proper ignition coil to fire. The input circuit to PCM is referred to as the CMP input or circuit.