LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1227 (Bumper System) >> Removal And Installation >> Front Bumper >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bumper cover. For additional information, refer to FRONT BUMPER COVER .
  2. Remove the front bumper nuts.
    • To install, tighten to 55 Nm (41 lb-ft).
  3. Remove the front bumper.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals