LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1226 (Seat System) >> Removal And Installation >> Rear Seat Cushion Cover - 60 Percent of 60/40 Bench, Second Row >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the second row, 60 percent seat. For additional information, refer to REAR SEAT - 60/40 BENCH, SECOND ROW .
  2. Remove the second row, 60 percent seat backrest. For additional information, refer to REAR SEAT BACKREST - 60 PERCENT OF 60/40 BENCH, SECOND ROW .
  3. Release the cushion trim cover J-clips and remove the trim cover.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals