LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1226 (Seat System) >> Removal And Installation >> Rear Seat Cushion Cover - 20 Percent, Second Row >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the seat cushion trim cover J-clips attaching the seat cushion trim cover to the cushion pan.
    2. NOTE: Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the seat cushion foam pad.
    NOTE: On assembly, make sure to feed the pull strap through the seat cushion trim cover.
  2. Separate the hook and loop strips and remove the seat cushion trim cover from the foam pad.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals