LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1226 (Seat System) >> Disassembly And Assembly >> Rear Seat Cushion - Third Row >> Disassembly and Assembly

Disassembly and Assembly

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the third row cushion. For additional information, refer to REAR SEAT - THIRD ROW .
    2. CAUTION: Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the seat cushion foam pad.
  2. Release the J-clips, separate the hook and loop fasteners and remove the cushion trim cover.
  3. Remove the retainers and the sound insulator.
  4. To assemble, reverse the disassembly procedure.
scientia non olet · About LEMON Manuals