Memory Seats

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Memory Seat Set Switch

Courtesy of FORD MOTOR CO.

This system allows automatic positioning of the driver seat to 3 programmable positions.

To program position 1, move the driver seat to the desired position using the seat regulator control switch. Depress the set button. Within 5 seconds, depress button 1.
To program position 2, repeat the previous procedure using the set button and button 2.
To recall position 1, depress button 1. To recall position 2, depress button 2.

A position can only be recalled when the transmission selector is in PARK or NEUTRAL. A position may be programmed at any time.