LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1221 (Daytime Running Lamps System) >> Removal And Installation >> Daytime Running Lamps (DRL) Module >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the daytime running lamp (DRL) module nut.
    • To install, tighten to 9 Nm (80 lb-in).
  2. Disconnect the electrical connector.
  3. Remove the DRL module.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals