LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1215 (HVAC System - Air Conditioning) >> Removal And Installation >> Clutch and Clutch Field Coil >> Removal

Clutch and Clutch Field Coil: Removal

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C compressor. For additional information, refer to AIR CONDITIONING (A/C) COMPRESSOR - 4.0L SOHC  or AIR CONDITIONING (A/C) COMPRESSOR - 4.6L (2V) .
  2. Remove the A/C clutch disc and hub nut.
    1. Using the special tool, hold the clutch disc and hub.
    2. Remove the nut.
      Fig 1: Removing A/C Clutch Disc And Hub Nut
      G03945252Courtesy of FORD MOTOR CO.
  3. Remove the A/C clutch disc and hub.
  4. Remove the A/C clutch hub spacer.
  5. Remove the A/C compressor pulley snap ring.
    6. CAUTION: Do not use air tools. Damage to the A/C clutch pulley or A/C compressor may result.
    Fig 2: Removing A/C Clutch Pulley
    G03945253Courtesy of FORD MOTOR CO.
  6. Using the special tool, remove the A/C clutch pulley.
  7. Remove the A/C clutch field coil snap ring.
  8. Remove the A/C clutch field coil.
scientia non olet · About LEMON Manuals