LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1213 (HVAC System - Control Components) >> Removal And Installation >> Vacuum Reservoir >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the vacuum reservoir screw.
  2. Remove the vacuum reservoir.
  3. Disconnect the vacuum connector.
  4. To install, reverse the removal procedure.