LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Clutch System) >> Removal & Installation >> Clutch Slave Cylinder & Release Bearing >> Notes

Clutch Slave Cylinder & Release Bearing: Notes

WARNING: This page is about a different car, the 2002 Ford Ranger, 2002 Ford Explorer Sport Trac, 2002 Ford Explorer Sport, and 2002 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Clutch release bearing is prelubed and should not be cleaned with solvent. Clutch release hub and bearing are replaced as an assembly. DO NOT disassemble for inspection or replacement.
scientia non olet · About LEMON Manuals