Clutch Slave Cylinder & Release Bearing: Installation
WARNING: This page is about a different car, the 2002 Ford Ranger, 2002 Ford Explorer Sport Trac, 2002 Ford Explorer Sport, and 2002 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse the removal procedure. Position the clutch slave cylinder to the transmission. Install the bolts and tighten to specification. See Fig 1. See TORQUE SPECIFICATIONS . Install the transmission. See TRANSMISSION . Depress and release the clutch pedal 5 full strokes. Bleed hydraulic system. See BLEEDING .