LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1203 (Engine Emission Control System) >> Removal And Installation >> Positive Crankcase Ventilation (PCV) Valve - 4.0L SOHC >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the PCV valve electrical connector.
  2. Disconnect the PCV valve hose.
    3. NOTE: If the PCV valve is removed from the valve cover, a new PCV valve must be installed.
  3. Rotate the PCV valve counterclockwise and remove it from the valve cover.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals