Removal and Installation
WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the exhaust gas recirculation (EGR) system module-to-exhaust manifold tube upper fitting.
- To install, tighten to 40 N.m (30 lb-ft).
- Disconnect the EGR system module-to-exhaust manifold tube lower fitting and remove the tube.
- To install, tighten to 40 N.m (30 lb-ft).
- To install, reverse the removal procedure.