LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1202 (Warning System) >> General Procedures >> Safety Belt Minder Deactivating/Activating >> Preparation

Safety Belt Minder Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before deactivating/activating the belt minder, set the parking brake.
  2. Place the transmission range selector lever in P (PARK).
  3. Place the ignition switch in the OFF position.
  4. Close all the vehicle doors.
  5. Unbuckle the driver safety belt.
  6. Place the parking lamps/headlamps switch in the OFF position.
scientia non olet · About LEMON Manuals