LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1201 (Wiper System And Washer System) >> General Procedures >> Windshield Wiper Blade and Pivot Arm Adjustment

Windshield Wiper Blade and Pivot Arm Adjustment

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Cycle and park the windshield wipers.
  2. Verify the distance between the center of the (1) RH windshield wiper blade and the (3) bottom of the windshield glass to be sure the distance is within specification.
    Fig 1: Measuring Distance Center Of RH Windshield Wiper Blade
    G03946182Courtesy of FORD MOTOR CO.
  3. Verify the distance between the center of the (2) LH windshield wiper blade and the (3) bottom of the windshield glass to be sure the distance is within specification.
    Fig 2: Measuring Distance Center Of LH Windshield Wiper Blade
    G03946183Courtesy of FORD MOTOR CO.
  4. If the distance is not within specification, remove the windshield wiper pivot arm and reposition to specification.
scientia non olet · About LEMON Manuals