LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1197 (Electronic Engine Control System) >> Removal And Installation >> Camshaft Position (CMP) Sensor - 4.6L (2V) >> Notes

Camshaft Position (CMP) Sensor - 4.6L (2V): Notes

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL(S) CHART

G03963028
Remover, Power Steering Pump Pulley
211-016 (T69L-10300-B) or equivalent
G03945465
Installer, Power Steering Pump Pulley
211-185 (T91P-3A733-A) or equivalent
G03879006
Installer Set, Teflon Seal 211-D027 (D90P-3517-A) or equivalent
Fig 1: View Of Camshaft Position (CMP) Sensor - 4.6L SOHC With Torque Specifications
G03948460Courtesy of FORD MOTOR CO.