LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1196 (Exterior Lighting System) >> Removal And Installation >> Stoplamp Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the stoplamp switch retaining pin.
  2. Remove the stoplamp switch bushing.
  3. Disconnect the electrical connector.
  4. Remove the stoplamp switch.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals