LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1196 (Exterior Lighting System) >> Removal And Installation >> Side Turn Signal Lamp >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the headlamp. For additional information, refer to HEADLAMP ASSEMBLY .
  2. Remove the turn signal lamp screw.
  3. Disconnect the electrical connector.
  4. Remove the turn signal lamp assembly.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals