LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1196 (Exterior Lighting System) >> Removal And Installation >> Side Lamp Assembly >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front fender splash shield. For additional information, refer to FRONT END BODY PANELS .
  2. Disconnect the electrical connector.
  3. Remove the side lamp assembly.
  4. To install, reverse the removal procedure.