LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1194 (Instrument Panel And Console) >> Removal And Installation >> Instrument Cluster Finish Panel >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 steering column opening cover screws.
  2. Remove the steering column opening cover.
  3. Remove the 3 lower steering column cover screws.
  4. Remove the lower steering column cover.
  5. Remove the upper steering column cover.
  6. Remove the instrument center finish panel.
  7. Disconnect the instrument center finish panel electrical connectors.
  8. Remove the 2 instrument cluster finish panel screws.
  9. Remove the instrument cluster finish panel.
  10. Disconnect the steering column electrical connectors.
  11. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals