Removal and Installation
WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the brake pedal and bracket. For additional information, refer to BRAKE PEDAL AND BRACKET .
- Remove the 2 brake pedal motor screws and the motor.
- To install, reverse the removal procedure.
NOTE:
Do not discard the screws. These screws must be used to reinstall the adjustable pedal motor.
NOTE:
Make sure the brake pedal and the accelerator pedal are in the same position before connecting the drive cable to the adjustable pedal motor.