LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1187 (Instrument Cluster) >> Diagnosis And Testing >> Instrument Cluster >> Pinpoint Test O: The Air Bag Warning Indicator Is Never/Always On >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

The air bag warning indicator is powered through the instrument cluster when the ignition switch is in the START/RUN position. The instrument cluster monitors the control circuit 608 (BK/YE) and illuminates the air bag warning indicator based upon the air bag signal received from the restraint control module (RCM). The instrument cluster illuminates the air bag warning indicator when it receives an open (no ground) from the RCM on control circuit 608 (BK/YE). The instrument cluster turns off the air bag warning indicator if it receives a ground signal from the RCM on control circuit 608 (BK/YE).