LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1186 (Anti-Lock Brake System Control) >> Diagnosis And Testing >> Principles of Operation >> Pinpoint Test Q: The Stability Assist Switch Indicator Is Never/Always On >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Circuit 1003 (GY/YE) provides voltage to the stability traction control switch. Ground for the stability traction control indicator lamp is provided and controlled by the anti-lock brake system (ABS) module through circuit 960 (BK/LB).

scientia non olet · About LEMON Manuals