LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1186 (Anti-Lock Brake System Control) >> Diagnosis And Testing >> Principles of Operation >> Pinpoint Test P: DTC C1440 (ABS Only) - Pressure Transducer Signal Fault >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

The brake pressure switch provides an additional speed control deactivation if the stoplamp switch fails. When the brake pedal is pressed, 1700 kPa (246 psi) of brake fluid pressure in the brake master cylinder opens the brake pressure switch, removing B+ voltage to the speed control servo electric clutch.

scientia non olet · About LEMON Manuals