LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1182 (Brake System - General Information) >> General Procedures >> Brake System Bleeding >> Anti-Lock Brake System (ABS) Hydraulic Control Unit (HCU) Bleeding

Anti-Lock Brake System (ABS) Hydraulic Control Unit (HCU) Bleeding

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This procedure is required only when a new HCU is installed.
  1. Connect the diagnostic tool and follow the ABS bleed instructions.
  2. Use the caliper bleed procedure to bleed the system. Begin at the RH rear caliper.
scientia non olet · About LEMON Manuals