LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1182 (Brake System - General Information) >> General Procedures >> Brake Disc Machining >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL SPECIFICATION

G04000570
 On-Car Brake Lathe 201-00002 or equivalent
scientia non olet · About LEMON Manuals