Recalling a Stored Adjustable Pedal Position

Once the driver has stored a preferred adjustable pedal position, the driver can recall the setting by pressing the corresponding memory switch, or by using a programmed remote keyless entry (RKE) transmitter. Recalling a stored adjustable pedal position can be accomplished by doing the following:

• The driver can recall a preferred adjustable pedal position by pressing one or both of the memory recall switches. Pressing memory switch 1 initiates a recall of the adjustable pedal position stored in memory location 1. Pressing memory switch 2 initiates a recall of the adjustable pedal position stored in memory location 2. Pressing both memory switch 1 and memory switch 2 initiates a recall of the adjustable pedal position stored in memory location 3.
• A remote transmitter can be used to recall previously set memory positions. The RKE transmitters are manufactured with an assigned personality number (1, 2, or 3) and are so designated on the back of the RKE transmitter case. The RKE transmitter assigned with personality 1 is capable of only recalling memory position 1. Similarly, the RKE transmitters assigned with personalities 1, 2, and 3 can recall memory positions 1, 2, and 3 respectively.
• Memory recall occurs when the UNLOCK switch is pressed on the RKE transmitters. A second press of the UNLOCK switch, which unlocks the passenger doors, does not initiate a memory recall.
• A memory recall in progress does not prohibit the initiation of another memory recall; the most recently requested memory recall is executed.