LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1178 (Power Steering System) >> Removal And Installation >> Power Steering Pump Pulley - 4.0L Engine >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the 3 power steering pump pulley bolts.
  2. Rotate the tensioner and remove the engine accessory drive belt from the power steering pump pulley.
  3. Remove the 3 bolts and the power steering pump pulley.
    • To install, tighten to 25 Nm (18 lb-ft).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals