LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1176 (Windows And Glass) >> Removal And Installation >> Front Door Glass Top Run >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer, 2005 Ford Explorer, 2004 Mercury Mountaineer, and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door window glass. For additional information, refer to FRONT DOOR WINDOW GLASS .
  2. Remove the exterior moulding.
  3. Remove the 2 front door glass top run channel assembly bolts.
    • To install, tighten to 7 Nm (62 lb-in).
  4. Remove the front door glass top run channel assembly through the top opening of the front door.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals