LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1176 (Windows And Glass) >> Diagnosis And Testing >> Glass, Frames and Mechanisms >> Pinpoint Tests >> Pinpoint Test D: Single Power Window Is Inoperative - Driver Rear Window >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer, 2005 Ford Explorer, 2004 Mercury Mountaineer, and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Under normal operation the driver rear window control switch receives power from the driver window control switch through circuit 170 (RD/LB). The driver rear window control switch provides power to the power window motor through circuit 885 (YE/LB)/882 (BN/YE) and ground through circuit 884 (YE/BK)/881 (BN) to operate the driver rear window down, and power through circuit 884 (YE/BK)/881 (BN) and ground through circuit 885 (YE/LB)/882 (BN/YE) to operate the driver rear window up.

When operating the driver rear window using the driver window control switch, power is sent to the driver rear window control switch through circuit 316 (YE/LB) and ground through circuit 317 (GY/OG) to operate the driver rear window down, and power through circuit 317 (GY/OG) and ground through circuit 316 (YE/LB) to operate the driver rear window up.

scientia non olet · About LEMON Manuals