Power Window Control

WARNING: This page is about a different car, the 2005 Mercury Mountaineer, 2005 Ford Explorer, 2004 Mercury Mountaineer, and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

The power window system can be operated from the driver window control switch or from the window control switches located on each door panel. The driver window control switch has 2 modes of operation for the driver power window, manual and auto. All other windows operate in the manual mode only.

Manual mode moves the window downward until the switch is released. The driver power window will operate in the manual mode when the driver window control switch is pressed to the 1st detent position.

Auto mode provides the one-touch down (OTD) feature for the driver front power window. The OTD function allows the driver front power window to be completely lowered when the driver window control switch is pressed to the 2nd detent position and then released. OTD is controlled by the driver window control switch.

The power window system will only operate if:

the ignition is in the RUN or ACC position.
the accessory delay feature is in the active mode.