LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1163 (Driveline System -- General Information) >> Description And Operation >> Driveline System >> Vehicle Certification (VC) Label Example

Vehicle Certification (VC) Label Example

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Vehicle Certification (VC) Label Example
G03912378Courtesy of FORD MOTOR CO.

The vehicle certification (VC) label is located in the driver door jamb. The first 2 digits of the axle code indicate the rear axle and the 3rd digit refers to the front axle, if so equipped. For additional information on the VC label, refer to IDENTIFICATION CODES .