LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1155 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Output Shaft Ring Gear and Hub Shaft Assembly >> Assembly

Output Shaft Ring Gear and Hub Shaft Assembly: Assembly

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the output shaft ring gear onto the output shaft hub.
    1. Install the output shaft ring gear.
    2. Install the retaining ring.
      Fig 1: Installing Output Shaft Ring Gear Onto Output Shaft Hub
      G03949060Courtesy of FORD MOTOR CO.
  2. Install the seal.
    Fig 2: Identifying Seal
    G03949058Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals