LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1155 (Automatic Transmission) >> Diagnosis And Testing >> Preliminary Inspection >> Check Fluid Level and Condition >> Fluid Condition Check

Fluid Condition Check

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the fluid level. Only remove the small (center) plug for this procedure.
  2. Observe the color and the odor of the fluid. Under normal circumstances the color should be dark reddish, not brown or black.
  3. Allow the fluid to drip onto a facial tissue and examine the stain.
  4. If evidence of solid material is found, the transmission fluid pan should be removed for further inspection.
  5. If fluid contamination or transmission failure is confirmed by the sediment in the bottom of the transmission fluid pan, the transmission must be disassembled and completely cleaned.
  6. Carry out diagnostic checks and adjustments. Refer to DIAGNOSIS BY SYMPTOM .
scientia non olet · About LEMON Manuals