SSA, SSB, SSC, SSD and TCC in Bench Mode
WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
The parking brake must be set prior to carrying out this procedure.
The BENCH mode allows the technician to carry out electrical circuit checks on the following components:
- SSA - Activates SS A OFF or ON
- SSB - Activates SS B OFF or ON
- SSC - Activates SS C OFF or ON
- SSD - Activates SS D OFF or ON
- TCC - Activates TCC OFF or ON
OSC "SSA, SSB, SSC, SSD, TCC" BENCH mode operates ONLY when:
- VSS and digital TR sensor are operational.
- No VSS and digital TR sensor DTCs.
- Transmission range selector lever in P or N.
- Key ON.
- Engine OFF.
OSC Command Values:
- OFF - Turns solenoid OFF.
- ON - Turns solenoid ON.
- XXX - Cancels OSC value sent.
- SEND - Sends the values to PCM.