LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1155 (Automatic Transmission) >> Description And Operation >> Geartrain >> Output Shaft

Output Shaft

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

For component location, refer to TRANSMISSION .

The output shaft is supported by a bearing in the case and by a bearing in the extension housing. End positioning is controlled by the parking gear and by the reverse ring gear hub and snap ring.

scientia non olet · About LEMON Manuals